Microchip PIC Forum: [piclist] Re: Savining a Hex file in MPLAB

Thursday, November 15, 2007

[piclist] Re: Savining a Hex file in MPLAB

If you cannot disassemble it send it to me with the chip number it
comes from and I'll see what I can do.

Robert

--- In piclist@yahoogroups.com, Dwayne Reid <dwayner@...> wrote:
>
> At 10:53 PM 11/14/2007, kg4pid wrote:
> >Does anyone know how to use MPLAB to read the hex code out of a non
> >code protected pic chip and then to save that to a hex file.
> >Under "Programmer" there is a "Read" command but I don't see any
way
> >to save it or even display to data that was read. I've gone thru
the
> >help and doen't see anything.
>
> Make sure that you have the "Program Memory" window visible /
> enabled. You will find this under either the "View" or "Window"
> captions at the top of MPLAB (depends on which version of MPLAB you
are using).
>
> You should also have the option of displaying disassembled code as
> well. I **think** you might have to right-click on the Program
> Memory window to see that option. Again, depends on which version
of
> MPLAB you are using.
>
> Hope this helps.
>
> dwayne
>
> --
> Dwayne Reid <dwayner@...>
> Trinity Electronics Systems Ltd Edmonton, AB, CANADA
> (780) 489-3199 voice (780) 487-6397 fax
> www.trinity-electronics.com
> Custom Electronics Design and Manufacturing
>